 |
PC Main Body |
| P/N : GHDA-99100 |
| Basic Components |
- C P U: Pentium4 2.8GHz and over
- Main Memory: 256M byte
- Hard Disk Memory: 40G byte |
 |
Monitor |
| P/N : GHDA-99200 |
| Basic Components |
- Size: 17 Inch
- Resolution: 1024?768 |
 |
Printer |
| P/N : GHDA-99300 |
| Basic Components |
- Type: Laser beam
- Resolution: 300 DPI and over |
 |
Measure Module (Intelligent Box, IB) |
Main Body P/N : GHDA-01000
Shroud P/N : GHDA-11105 |
| Basic Components |
Intelligent Box (IB) measures all the signals from the ECU and sensors of vehicle. The circuits of Scan, Oscilloscope, Ignition, Multimeter and Memory are equipped on the PCBs.
(Warning) For the safety reasons, IB should not be fallen on and damaged by unintended forces.
Keep out from moisture and dust. |
 |
Trolley (Cabinet) |
| P/N : GHDA-02100 |
| Basic Components |
| PC, Monitor, Printer, Keyboard installed with arms. |
 |
Arms |
| P/N : GHDA-02300 |
| Basic Components |
Intelligent Box (IB) and all the probes are firmly hooked
up. As to the User's purpose, the Arms can be moved. |
 |
Secondary Ignition Probe (red) |
| P/N : GHDA-06500 |
| Basic Components |
| The red Probe must be connected to '+' line (polarity). It contains 1 set of 3 red probes. |
 |
Secondary Ignition Probe (black) |
| P/N : GHDA-06600 |
| Basic Components |
The black Probe must be connected to '-' line
(polarity). It contains 1 set of 3 black probes. |
 |
Small Current Ampere Probe |
| P/N : GHDA-06200 |
| Basic Components |
Used for indirect measurement of current through the
wire. It enables correct measurement within the range
below 30A.
Make sure, the Arrow direction marked on Probe should be the same as the direction of Current Amp.
(Warning) If Probe is not connected, it displays "0A". It means that the current doesn't flow, it calls "Off Set".
So, do calibration before measuring. |
 |
Vacuum Probe |
| P/N : GHDA-06100 |
| Basic Components |
A probe is to measure vacuum pressure such as
manifolds. |
 |
Oscilloscope Probe |
| P/N : GHDA-05200 |
| Basic Components |
For the 6 channels, 6 probes with different colors and
numbers marked are supplied. |
 |
Scope Middle Module (1:3 Branch box) |
| P/N : GHDA-0510X |
| Basic Components |
Through this Scope Middle Module, it enables 3
oscilloscope probes to connect to Intelligent Box (IB).
Channel 1, channel 2 and channel 3 probe are neatly
connected to IB thru the Middle Module |
 |
Scope Middle Module (1:3 Branch box) |
| P/N : GHDA-0510Y |
| Basic Components |
Channel 4, channel 5 and channel 6 probe are neatly
connected to IB thru the Middle Module. |
 |
Ignition Middle Module (1:3 Branch Box) |
| P/N : GHDA-0640X |
| Basic Components |
Through this Ignition Middle Module, it enables
Secondary Ignition probes (red and black) and trigger
Pick-up Clamp to IB. |
 |
Multimeter Probe |
| P/N : GHDA-35270 |
| Basic Components |
| For Multimeter functions, this Probe shall be used to measure Voltage, Resistance, Frequency, Duty (+/-), Pulse (+/-). |
 |
Trigger Pick-up Clamp |
| P/N : GHDA-06700 |
| Basic Components |
| Connected to Plug No.1. Recognizing it the cylinder No.1 |
 |
DLC Main Cable |
| P/N : GHDA-DLP |
| Basic Components |
For the scan function, it shall be connected to DLC
Adaptor Cable. The one end of the cable has OBD-II 16 pin Adaptor. The other end is connected to the Main
Body, IB. |
 |
DLC Adaptor Cable |
1. Hyundai 12 pin Adaptor
P/N : GHDA-34010
2. Kia 6 pin Adaptor P/N : GHDA-34030
3. Kia 20 pin Adaptor(A-Type)
P/N : GHDA-34020
4. Kia 20 pin Adaptor(B-Type)
P/N : GHDA-34021
5. Daewoo 12 Pin Adaptor
P/N : GHDA-34080
6. Samsung 14 Pin Adaptor
P/N : GHDA-34060
7. SSangyong 14 Pin
Adaptor : GHDA-34040
8. Ssangyong 20 Pin
Adaptor : GHDA-34050
9. Universal 4 Pin Adaptor : GHDA-34070
10. OBD-II 16Pin Adaptor |
| Basic Components |
1. Hyundai 12 pin Adaptor
2. Kia 6 pin Adaptor
3. Kia 20 pin Adaptor(A-Type)
4. Kia 20 pin Adaptor(B-Type)
5. Daewoo 12Pin Adaptor
6. Samsung 14 pin Adaptor
7. Ssangyong 14 Pin Adaptor
8. Ssangyong 20 pin Adapto
9. Universal 4 pin Adaptor
10. OBD-II 16 Pin Adaptor |
 |
Battery Cable |
| P/N : GHDA-37210 |
| Basic Components |
Power supply.
Make sure connecting the vehicle's battery. Otherwise, it may get an incorrect measuring value. |
 |
DC Power Cable |
| P/N : GHDA-37220 |
| Basic Components |
| Supplies DC power to IB |
 |
USB Cable |
| P/N : GHDA-37310 |
| Basic Components |
| To connect PC and IB |
 |
Power Supply |
| P/N : GHDA-07100 |
| Basic Components |
| AC/DC converter : supplying DC 13.9V |
 |
Extension Cable (Scope and Small Current) |
Scope Extension Cable(Red)
P/N : GHDA-35280
Small Current Extension Cable(Black)
P/N : GHDA-35290 |
| Basic Components |
Extension cable for Scope, Multimeter, Small Current
Probe.
- 4 extension cables supplied for Scope, Multimeter
Probe.
- 1 extension cable supplied for Small Current Probe. |
 |
Needles (Spring pin) |
| P/N : GHDA-15310 |
| Basic Components |
Needles for Scope and Multimeter functions.
(Warning) Please do not pierce lines, put into the end of sensor's adaptor. |
 |
Large Current Ampere Probe |
| P/N : GHDA-06300 |
| Basic Components |
It enables precise measurement within the range of over 30A below 1000A.
Make sure, the Arrow direction marked on Probe should be the same as the direction of Current Amp.
(Warning) If Probe is not connected, it displays "0A". It means that the current doesn't flow, it calls "Off Set".
So, do calibration before measuring. |
 |
Pressure Sensor Module |
Pressure Module P/N : GHDA-0690X
Adaptor P/N :
Extension Cable P/N : GHDA-06991 |
| Basic Components |
For Cylinder pressure, Fuel pressure and Auto
Transmission oil pressure, Vaporizer pressure.
Used for pressure measurement of various fluids within
the vehicle.
Measures pressure below 24.6kg/㎠. |
 |
Wireless Remote Control set |
Sending Module P/N : GHDA-08100
Receiving Module P/N : GHDA-08200
Receiving Cable P/N : GHDA-08310 |
| Basic Components |
Remote controlling IB by this tool
1 Set: Sending Module, Receiving Module & Cable.
Screen RUN / STOP |
